Roofing Prices and Washington Buyer's Guide
A new roof in Washington typically costs $5.50 to $13.00 per square foot with Chase Construction NW, depending on the material. Architectural asphalt shingles start at $5.50 per square foot, and low-slope commercial systems like TPO and PVC run $12.50 to $13.00. Gutters start at $12.50 per linear foot.
Quick answer
- Most affordable full replacement: IKO Cambridge shingles, $550 per square ($5.50/sq ft)
- Most popular residential upgrade: GAF Timberline shingles, $650 per square ($6.50/sq ft)
- Best value for an aging flat roof in good structural shape: GACO silicone coating, $850 per square ($8.50/sq ft)
- Low-slope / commercial replacement: TPO $1,250, PVC $1,300, torch-down $1,200 per square
Chase Construction NW Washington Roofing Price Guide
Most roofing companies make you book an appointment before you see a single number. We publish our pricing so you can budget before anyone climbs a ladder. Below you’ll find our current rates, what each material is best for, real cost examples by roof size, and what Washington’s climate means for your choice.
Prices updated November 2026. Final pricing depends on roof pitch, layers to remove, deck condition and access, and is confirmed in a free written estimate.




2026 Roofing Prices in Washington
| Roofing material / system | Best for | Price per square (100 sq ft) | Price per sq ft |
|---|---|---|---|
| IKO Cambridge architectural shingles | Budget-conscious full replacement, rentals | $550 | $5.50 |
| GAF Timberline architectural shingles | Most homes, resale value | $650 | $6.50 |
| GACO silicone roof coating | Restoring sound low-slope/flat roofs | $850 | $8.50 |
| Torch-down (modified bitumen) | Small flat roofs, decks over living space, additions | $1,200 | $12.00 |
| 60-mil TPO membrane | Commercial and residential low-slope roofs | $1,250 | $12.50 |
| 60-mil PVC membrane | Restaurants, grease/chemical exposure, demanding low-slope roofs | $1,300 | $13.00 |
One roofing square = 100 square feet (a 10 ft × 10 ft area). Roofers price by the square because it measures actual roof surface, which is larger than your home’s floor area once pitch and overhangs are counted.
GAF Timberline Shingles – $650 per square
GAF Timberline is the best-selling shingle line in North America and the choice most Washington homeowners make for a full replacement. Architectural (dimensional) shingles give a layered, shake-like look and hold up better in wind than flat 3-tab shingles. Choose Timberline if you want a widely recognized brand that buyers know when you sell.
Chase Construction NW is a GAF Master Elite® certified contractor and GAF President’s Club award recipient. Master Elite status lets us offer GAF’s strongest warranties, including the Golden Pledge® Limited Warranty, on qualifying roof systems (GAF eligibility requirements apply).
IKO Cambridge Shingles – $550 per square
IKO Cambridge is a quality architectural shingle at about $1.00 less per square foot than Timberline. On a typical 2,000 sq ft roof, that’s roughly $2,000 in savings. It’s a strong pick for rental properties, homes you plan to sell in the next few years, or any project where budget leads.
Chase Construction NW is an IKO ROOFPRO Select contractor, so IKO roofs we install are eligible for IKO’s Iron Clad extended protection limited warranty (IKO terms apply).
60-mil TPO Roofing – $1,250 per square
TPO is a single-ply white membrane for low-slope and flat roofs. Seams are heat-welded into a continuous watertight sheet, and the reflective surface reduces heat gain in summer. The 60-mil thickness we install is thicker and more puncture-resistant than the 45-mil membranes some installers use to quote low. It’s our standard recommendation for commercial buildings and modern homes with flat sections.
60-mil PVC Roofing – $1,300 per square
PVC looks similar to TPO but resists grease, oils and many chemicals better. That makes it the right choice for restaurants with kitchen exhaust on the roof and industrial buildings. Its heat-welded seams also perform well where water ponds. Expect a modest $0.50 per sq ft premium over TPO.
GACO Silicone Roof Coating – $850 per square
If your low-slope roof is leaking or worn but the deck and insulation are still dry and solid, a GACO silicone coating can restore it without a tear-off. Silicone handles standing water well, which matters during long Washington rainy seasons. It costs less than replacement, creates minimal disruption for occupied buildings, and keeps old roofing out of the landfill. We’ll inspect first and tell you honestly whether your roof is a coating candidate.
Torch-Down Roofing – $1,200 per square
Torch-down (modified bitumen) is applied in layers that are heat-fused to the roof, creating a thick, durable surface. It’s a proven option for small flat roofs, porch and garage roofs, and walkable decks over living space. It’s installed with an open flame, so it should only be done by an experienced, insured crew.
How Much Does a New Roof Cost? Examples by Size
Multiply your roof’s area in squares by the price per square. These examples use our published rates before any adjustments for steep pitch, extra layers or deck repair.
Shingle roof replacement cost
| Roof size | Typical home | IKO Cambridge ($550/sq) | GAF Timberline ($650/sq) |
|---|---|---|---|
| 15 squares (1,500 sq ft) | Small ranch or cottage | $8,250 | $9,750 |
| 20 squares (2,000 sq ft) | Average single-story | $11,000 | $13,000 |
| 25 squares (2,500 sq ft) | Larger single-story or average two-story | $13,750 | $16,250 |
| 30 squares (3,000 sq ft) | Large home | $16,500 | $19,500 |
Low-slope and commercial roof cost
| Roof size | GACO silicone ($850/sq) | Torch-down ($1,200/sq) | 60-mil TPO ($1,250/sq) | 60-mil PVC ($1,300/sq) |
|---|---|---|---|---|
| 10 squares (1,000 sq ft) | $8,500 | $12,000 | $12,500 | $13,000 |
| 20 squares (2,000 sq ft) | $17,000 | $24,000 | $25,000 | $26,000 |
| 50 squares (5,000 sq ft) | $42,500 | $60,000 | $62,500 | $65,000 |
How to estimate your roof size
Your roof area is larger than your home’s floor area. Start with the footprint (including the garage and roof overhangs), then add about 10–15% for a low-pitch roof or 25–40% for a steep one. A 1,800 sq ft single-story home with a moderate pitch often lands around 20–22 squares. We measure every roof precisely before quoting.
What can change the final price
- Roof pitch: steep roofs require more safety equipment and labor.
- Existing layers: removing two or more layers adds disposal and labor.
- Deck condition: soft or rotted sheathing, common after years of Northwest moisture, is replaced as needed.
- Complexity: dormers, valleys, skylights and chimneys add flashing work.
- Access: tight lots or limited dumpster placement can add time.

Gutter Installation Cost in Washington
Seamless K-style gutters cost $12.50 per linear foot for 5-inch and $15.00 per linear foot for 6-inch.
| Gutter type | Price per linear foot | 150 ft home | 200 ft home |
|---|---|---|---|
| 5K gutters (5-inch K-style) | $12.50 | $1,875 | $2,500 |
| 6K gutters (6-inch K-style) | $15.00 | $2,250 | $3,000 |
5-inch or 6-inch gutters?
5-inch K-style gutters are the standard for most single-story and average-size homes. Step up to 6-inch if you have:
- Large or steep roof sections that send a lot of water to one gutter run
- Valleys that concentrate runoff onto one corner
- Tall firs, cedars or maples nearby; the wider trough clogs less often with needles and leaves
- Long gutter runs between downspouts
Replacing gutters at the same time as your roof is the most efficient time to do it: the drip edge, fascia and gutter line can all be corrected together.
What Washington Homeowners Should Know Before Re-Roofing
Washington weather is hard on roofs in a specific way: not one big storm, but months of steady moisture, moss and wind. That should shape your material choice more than looks.
Rain, moss and algae (Western Washington)
In Tacoma, Seattle, Olympia, Everett and across the Puget Sound region, roofs stay damp for much of the fall, winter and spring. Moss lifts shingle edges and holds water against the roof. Ask for algae-resistant shingles, good attic ventilation and properly installed underlayment, and plan on periodic moss treatment. On flat roofs, choose a system that tolerates ponding water, like PVC, TPO or silicone.
Wind and fallen debris
Winter windstorms and tall evergreens mean branches and needles on the roof. Architectural shingles installed to the manufacturer’s nailing pattern hold up better in wind than 3-tab shingles. Keep gutters clear to stop water backing up under the roof edge.
Permits, taxes and contractor registration
- Permits: many Washington cities and counties require a permit for re-roofing. Requirements vary by jurisdiction; we handle this for you.
- Sales tax: in Washington, sales tax generally applies to roofing labor and materials. Make sure every quote you compare states whether tax is included.
- Contractor registration: Washington requires roofing contractors to be registered with the Department of Labor & Industries (L&I), bonded and insured. You can look up any contractor on L&I’s Verify a Contractor tool. Chase Construction NW: WA contractor registration #CHASECN981NN (UBI 602222227).
- Energy code on low-slope roofs: replacing a commercial or flat roof can trigger insulation requirements under the Washington State Energy Code. We check this before quoting so there are no surprises.
When to schedule
The drier months from late spring through early fall are the most requested time for roof replacement, and schedules fill early. Booking an estimate in winter or early spring gives you the best choice of dates.
Which Roofing Material Is Right for You?
| Your situation | Recommended system | Price per sq ft |
|---|---|---|
| Pitched home roof, tight budget or rental | IKO Cambridge shingles | $5.50 |
| Pitched home roof, long-term home or resale appeal | GAF Timberline shingles | $6.50 |
| Flat or low-slope roof that leaks but has a dry, solid deck | GACO silicone coating | $8.50 |
| Small flat roof, porch, garage or deck over living space | Torch-down | $12.00 |
| Commercial or residential low-slope replacement | 60-mil TPO | $12.50 |
| Restaurant, grease exhaust or chemical exposure | 60-mil PVC | $13.00 |
Many homes have both: a pitched main roof in shingles and a flat section over a porch or addition in torch-down or TPO. We quote each area with the right system instead of forcing one material everywhere.
How to Compare Roofing Quotes
The lowest number often isn’t the cheapest roof. Ask every contractor:
- Is tear-off and disposal included, and how many layers are you removing?
- What underlayment, ice and water shield, flashing and ventilation are included?
- How is deck repair priced if you find rot?
- Is sales tax included?
- For flat roofs, what membrane thickness (45-mil or 60-mil)?
- What workmanship warranty do you provide, and which manufacturer warranty applies?
- What is your Washington L&I contractor registration number?
Why Chase Construction NW
Chase Construction NW has roofed Pacific Northwest homes and buildings since 2002, from our base in Edgewood, WA. We hold GAF’s top contractor certification, Master Elite®, plus the GAF President’s Club award, are an IKO ROOFPRO Select contractor, and have a 4.9-star rating from 222 Google reviews.
- Published, upfront pricing
- Residential and commercial roofing, plus gutters, from one crew
- Free written estimates with a line-by-line breakdown
Roofing Cost FAQ
How much does a new roof cost in Washington?
With Chase Construction NW, a new shingle roof costs $5.50 to $6.50 per square foot. A typical 20-square (2,000 sq ft) roof runs about $11,000 with IKO Cambridge or $13,000 with GAF Timberline, before adjustments for pitch, layers and deck repair.
What is a roofing square?
A roofing square is 100 square feet of roof surface, a 10 ft by 10 ft area. Roofers price by the square because roof area is larger than floor area once pitch and overhangs are included.
Is GAF Timberline worth the extra cost over IKO Cambridge?
GAF Timberline costs $1.00 more per square foot, about $2,000 on a 20-square roof. It’s worth it if you plan to stay long-term or want a widely recognized brand for resale. IKO Cambridge is the better value for rentals or near-term sales.
How much does a flat roof cost in Washington?
Flat and low-slope roof replacement costs $12.00 to $13.00 per square foot: torch-down $12.00, 60-mil TPO $12.50 and 60-mil PVC $13.00. A GACO silicone coating at $8.50 per square foot can restore a flat roof whose deck is still sound.
TPO or PVC: which is better?
Both are durable heat-welded membranes. TPO is the cost-effective standard for most low-slope roofs. PVC costs $0.50 more per square foot and is the better choice where grease, oils or chemicals reach the roof, such as restaurants.
How much do new gutters cost?
5-inch K-style gutters cost $12.50 per linear foot and 6-inch K-style gutters cost $15.00 per linear foot. A home with 150 feet of gutters runs about $1,875 for 5-inch or $2,250 for 6-inch.
Do I need a permit to replace my roof in Washington?
Many Washington cities and counties require a permit for re-roofing, and rules vary by jurisdiction. Chase Construction NW checks local requirements and handles permits for your project.
Our Services
We are proud to provide our customers with the best roofing systems and roofing warranties on the market today. We utilize a “complete roofing system” on every home, ensuring that your new investment will protect your assets will for years to come.
Residential Roofing
Commercial Roofing
Roof Upgrades
Attic Insulation
Installation of attic insulation is one of the simplest and most cost-effective ways of improving the overall indoor comfort of a home. Proper insulation of the attic also brings about a major reduction in energy consumption and expenses.
Painting and Siding
About us
Our vision is to provide every customer with an exceptional roof system.
Chase Construction North West, Inc is dedicated to the principles that have made us one of Tacoma and the Puget Sound areas’ premium roofing contractors. As a licensed, bonded and insured roofing contractor (Washington L&I License # CHASECN981NN), we have been providing local families with exceptional roofing for over two decades. Founded by Joel Beattie in 2002, Joel brings over thirty years of construction experience to every project.








If your roof is old or worn down, don't wait to replace it!
Chase Construction NW, Inc. has the expert service and affordable prices to set you up with a brand new roof today!